Epoxy Floor Coating Systems in London, Ontario
Not every concrete floor needs the same coating system. A garage floor has different requirements than a basement, washroom, warehouse, factory, or aircraft hangar. Moisture levels, traffic, chemical exposure, UV exposure, slip resistance, & appearance all affect which flooring system will perform best.
Our epoxy floor coating systems in London, Ontario, are built by combining the right base layers, repair methods, broadcast options, topcoats, & performance additives to suit the space. That may include high-build epoxy, moisture mitigation systems, polyaspartic topcoats, urethane finishes, polysiloxane coatings, chemical-resistant systems, or anti-slip textures, depending on the project.
This page is designed to help explain how those systems work & how we choose the right combination for long-term performance.
How Epoxy Floor Coating Systems Work
Most high-performance floors are not just one product. They are built as a system.
That combination allows the floor to be adjusted for durability, appearance, traction, cure time, UV stability, abrasion resistance, or chemical exposure, depending on how the space will be used.
Base System Options
High-Build Epoxy Systems
Read MoreHigh-build epoxy systems create a thicker, more durable coating layer than thin paints or light sealers. They are commonly used where long-term wear resistance, strong adhesion, & concrete protection are important.
- Garages
- Basements
- Commercial spaces
- Warehouses
- Factories
- Aircraft hangars
High-build epoxy is often the foundation for other finishes.
Moisture Mitigation Systems
Read MoreMoisture seeping through the concrete can cause many floor coatings to fail if it is not properly addressed. That is why some projects require a moisture mitigation system before the finished flooring system is installed.
These systems are often most important in:
- Basements
- Ground-level commercial spaces
- Industrial slabs
- Concrete with elevated moisture vapour transmission
Moisture mitigation helps protect the long-term adhesion of the full floor coating system.
Chemical-Resistant Systems
Read MoreSome spaces need more than standard durability. They need a system that can withstand oils, fluids, cleaners, corrosive materials, and harsh industrial conditions.
Chemical-resistant systems may be used in:
- Factories
- Tank rooms
- Agricultural environments
- Aircraft hangars
- Food-related spaces
- Utility & mechanical rooms
Where exposure is especially aggressive, more specialized chemistries such as novolac epoxy systems may be considered because novolac systems are commonly used where higher chemical resistance is required.
Topcoat & Finish Options
Polyaspartic Topcoats
Read MorePolyaspartic Topcoats
Polyaspartic topcoats are often used when UV stability, faster cure times, abrasion resistance, & long-term durability are important. These are especially useful in spaces exposed to sunlight or where reduced downtime matters.
Polyaspartic topcoats are commonly selected for:
- Garages
- Porches
- Exterior concrete
- Commercial spaces
- Hangars
- Areas that benefit from faster return to service
Polyaspartic systems are widely used as durable topcoats in resinous flooring because they offer fast cure properties & good UV stability.
Polyurethane Topcoats
Read MorePolyurethane Topcoats
Polyurethane topcoats are commonly used where flexibility, abrasion resistance, & long-term wear performance are priorities. They can be a strong option in high-traffic commercial or industrial settings.
They are often chosen for:
- Factories
- Warehouses
- Commercial spaces
- Mechanical areas
- Utility rooms
- Hangars
Polysiloxane Finishes
Read MorePolysiloxane Finishes
Polysiloxane coatings are often chosen where UV stability, weathering resistance, & long-term colour retention matter. They are commonly used in protective coating environments because they combine strong durability with excellent exposure performance.
These may be used in:
- Exterior exposed areas
- Aircraft hangars near hangar doors
- Specialty commercial or industrial spaces
- Projects where long-term finish stability matters
Gloss, Satin, & Matte Finishes
Read MoreGloss, Satin, & Matte Finishes
The finish sheen will also affect the final result to achieve the desired look and feel.
- Gloss creates a brighter, more reflective look
- Satin provides a balanced finish with moderate sheen
- Matte gives a softer, lower-glare appearance
The right finish depends on the space, lighting conditions, maintenance expectations, & overall design goals.
Performance Options
Anti-Slip Texture
Read MoreAnti-Slip Texture
Some spaces need added traction to improve safety. Anti-slip textures can be built into the system using aggregate or grit, depending on the environment.
These are commonly recommended in:
- Porches & exterior steps
- Washrooms
- Lunchrooms
- Agricultural spaces
- Warehouses
- Food processing areas
- Wet or washdown environments
Safety coatings and non-slip systems are commonly used in commercial and industrial flooring where traction matters.
UV-Stability
Read MoreUV-Stability
Not every coating responds the same way to sunlight. UV-stable topcoats are important where direct light exposure can affect colour or finish performance over time.
This matters most in:
- Porches
- Exterior concrete
- Hangars near doors
- Showrooms with strong natural light
- Spaces with large glass exposure
Abrasion Resistance
Read MoreAbrasion Resistance
High-traffic environments often need stronger wear resistance. Abrasion resistance becomes more important with:
- Forklift traffic
- Rolling carts
- Heavy equipment
- Constant foot traffic
- Frequent cleaning
This is especially relevant in commercial, industrial, & agricultural applications.
Fast Cure Systems
Read MoreFast Cure Systems
Some environments cannot tolerate long downtime. Faster cure systems help return spaces to service sooner, which is especially important in:
- Active commercial spaces
- Garages
- Industrial facilities
- Aircraft hangars
- Time-sensitive renovation projects
How We Match the System to the Space
Choosing the right epoxy floor coating system in London, Ontario, depends on the environment, not just the appearance.
A garage may prioritize:
- Hot tire resistance
- Durability
- Decorative finish
A basement may prioritize:
- Moisture mitigation
- Easy cleaning
- A clean finished appearance
A warehouse may prioritize:
- Abrasion resistance
- Dust reduction
- Safety striping
A factory may prioritize:
- Chemical resistance
- Machinery traffic
- Line marking & safety
An agricultural space may prioritize:
- Hygiene
- Anti-slip texture
- Acid & moisture resistance
An aircraft hangar may prioritize:
- Aviation fluid resistance
- UV stability
- Smooth traffic transitions
- Parking & hazard markings
Floor Type Options Within the System
The system chemistry is one part of the decision. The visible floor type is the other.
Depending on the project, the final floor may be installed as:
Flake Floor Coatings
Learn MoreQuartz Floor Coatings
Learn MoreMetallic Floor Coatings
Learn MoreSolid Colour Floor Coatings
Learn MoreGrind & Seal
Learn MoreEach of these gives the floor a different look, texture, & performance profile.
Frequently Asked Questions
What is an epoxy floor coating system?
An epoxy floor coating system is a multi-layer concrete flooring system that may include preparation, repair, moisture mitigation, epoxy base coats, decorative or functional broadcast materials, & protective topcoats depending on the project.
What is the difference between epoxy & polyaspartic?
Epoxy is commonly used as the main base or body coat because of its thickness & adhesion. In contrast, polyaspartic is often used as a topcoat where faster cure times, UV stability, & surface durability are important. Resinous flooring manufacturers commonly distinguish systems this way.
What is a moisture mitigation system?
A moisture mitigation system helps protect the coating system from moisture vapour migrating through the concrete slab, which can otherwise lead to premature coating failure.
When is polyurethane or polysiloxane a better choice?
These are often selected when the project needs specific topcoat performance, such as abrasion resistance, flexibility, UV stability, or longer-term finish durability.
What is a novolac epoxy system?
Novolac epoxy is a more specialized chemical-resistant system often used where harsher chemical exposure is expected than standard epoxy systems are designed for like fertilizer facilities.
What finish is best for my space?
That depends on how the floor will be used, what kind of traffic or exposure it will face, how much slip resistance is needed, how quickly the space needs to return to service, & what final appearance you want.
Choose the Right Floor Coating System for Your Space
The right floor is not just about colour or style. It is about matching the correct coating system, topcoat, texture, & performance features to the way the space is actually used.
If you are comparing options for a residential, commercial, industrial, or agricultural project, we can help determine which epoxy floor coating system in London, Ontario, is the best fit for your environment.
WE DO EPOXY!
